3
3. Product Description
PL18 is an 18-channel air transmitter with 2.4GHz AFHDS 3 (third-generation automatic frequency hopping digital
system). And there is a variety of built-in models that you can set as your desired. It adapts fixed-wing aircraft,
helicopters, gliders, multicopters, robots, boats or cars.
3.1 System Features
AFHDS 3
(third-generation automatic frequency hopping digital system)
is a newly developed digital wireless system
with independent intellectual property rights by FLYSKY. It is compatible with one-way and two-way real-time data
packet transmission and transparent
data stream transmission.In other words, this system has advantages of both
AFHDS 2A and WS2A wireless system. It equips with a brand-new 2.4G chip, stable and reliable connection, good
real-time performance, and supports various configurations. Bring you the optimal configuration for multi-scenario
application performance.
Compatible with
Unidirectional/
Bidirectional
Real-time Data
Transmission
The system supports one-way and two-way connections. When the transmitter is working
in one-way transmission way, the receiver can receive data from the transmitter. When the
transmitter is working in two-way transmission way. The receiver can receive data from
the transmitter and the transmitter can also receive data from the receiver, as well as the
information cross from the temperature and speed sensor modules.
Data Transparent
Transmission
The independent data transparent
transmission module is built into RF system, which can
realize data transmission via transmitter and transparent transmission. It can be used for data
transmission of flight control.
Intelligent RF
configuration
To set the parameters which affect RF transmission distance, speed and anti-interference,
such as numbers of channels, resolution, bandwidth and receiver sensitivity. The system
can be set according to different application requirements to obtain the most suitable
performance.
Multi-channel
Frequency Hopping
This systems bandwidth ranges from 2.402GHz to 2.480GHz. Set intelligent RF configurations
accordding to your required, it can avoid or reduce the interference from other transmitters
with the same frequency via different configurations, different time of powering on the
transmitter, various patterns to the hopping frequency and various using frequency spots.
Unique ID
Recognition System
Each transmitter and receiver has it's own unique ID. Once the transmitter and receiver
have been bound, they will save the each other's ID and only connect with each other. When
the syetem is working,if the IDs are matched with each other, then the connection will be
connect, otherwise, there is no connection between transmitter and receiver. This unique
ID recognition syetem resists the interference so as to make the system stabler and more
reliable.
Low Power
Consumption
It is built using highly sensitive, low power consumption components. And it works in the
way of interval data transmission to improve transmitting efficient effectively and extend the
working time of the battery distinctly, while it consumes as little as one tenth the power of a
standard FM system.
