78
9.17 Hover adjust
In the current condition, in order to allow the helicopter to hove easily by adjusting the rate of
Throttle
and
Pitch
. To
set in another condition, you need to switch the condition first.
Tap repeatedly to toggle the funtion on or off.
Function setup:
1.
Tap
Swashplate ring
to enter the setting
interface.
2. Click
+
or
-
to set the appropriate value. Click
to return to the previous interface.
Function setup:
1.
Tap
Hover adjust
to enter the setting interface.
2. Tap the function you want to set.
3. Click
+
or
-
to set the appropriate value.
4.
Click to enter, and click
Throttle control
to
enter the control assign interface. Afterwards,
click a knob you want to set for throttle control
or turn the physial knob on the transmitter.
Then click to return to the previous interface.
5.
Tap
Pitch control
to enterthe control assign
interface. Click a knob you want to set for
throttle control or turn the physial knob on the
transmitter.
Note: For the control of the function, you can only set a knob.
Note: The green circle is the maximum range of the
swashplate. The length of the line indicates the angle of
the current swashplate. When the angle of the swashplate
exceeds the radius, it will be limited to the radius value.
⑴
⑴
⑵
⑵
⑴
Tap to select the
rate
.
⑴
Tap to enter the interface that can assign a
control to control the throttle.
⑵
Tap to enter the interface that can assign a
control to control the pitch.
⑵
"--" indicates the control is unassigned. After the
control is assigned, the control name is displayed
here.
The switch assignment interface
