FlyTech K738, User Manual

ii

Safety 

IMPORTANT SAFETY INSTRUCTIONS 

1.

To disconnect the machine from the electrical Power Supply, turn off the power 
switch and remove the power cord plug from the wall socket. The wall socket 
must be easily accessible and in close proximity to the machine. 

2.

Read these instructions carefully. Save these instructions for future reference. 

3.

Follow all warnings and instructions marked on the product. 

4.

Do not place this product on an unstable cart, stand, or table. The product may 
fall, causing serious damage to the product. 

5.

This product should be operated from the type of power indicated on the marking 
label. If you are not sure of the type of power available, consult your dealer or 
local power company. 

6.

Do not allow anything to rest on the power cord. Do not locate this product where 
persons will walk on the cord. 

CE MARK   

This device complies with the requirements of the EEC directive 2004/108/EC   
with regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage   
Directive” 

 
FCC 

This device complies with part 15 of the FCC rules. Operation is subject to the   
following two conditions: 

(1) This device may not cause harmful interference.   
(2) This device must accept any interference received, including interference that   
may cause undesired operation 

CAUTION ON LITHIUM BATTERIES   

There is a danger of explosion if the battery is replaced incorrectly. Replace only with 
the same or equivalent type recommended by the manufacturer. Discard used 
batteries according to the manufacturer’s instructions. 
 

Battery Caution

Risk of explosion if battery is replaced by an incorrectly type. 

Dispose of used battery according to the local disposal instructions. 

Safety Caution 

Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S) related 

legislation, peripherals shall be 4.7.3.2 "Materials for fire enclosure" compliant. 

  4.7.3.2 Materials for fire enclosures 

  For MOVABLE EQUIPMENT having a total mass not exceeding   

18kg.the material of a FIRE ENCLOSURE, in the thinnest significant   

wall thickness used, shall be of V-1 CLASS MATERIAL or shall pass   
the test of Clause A.2. 
For MOVABLE EQUIPMENT having a total mass exceeding 18kg