background image

1  Off

Illuminated  when  the  system  is  disarmed  (may  be  time  limited).

2  Part set

Illuminated  when the system is Part armed  (may be time  limited).

3  Full set

Illuminated  when the  system is Fully armed (may  be time limited)

4  Mains on Illuminated  -  indicates mains  supply is  present.

Flashing -  is a warning that  mains supply  is disconnected.

5  Alarm

Illuminated  -  Indicates an alarm has occurred.
Flashing  - An alarm has occurred and the system needs an
engineer reset. 

(Call your alarm company)

Fire

Full set

3

Part set

2

Off

5

Low battery

6

8

9

10

Panic

Mains on

Alarm

Tamper

7

Signalling

11

4

1

Explanation of indicators on the control panel

1

6

Note: Panic Indication is given when both Full and Off buttons are pressed

together and held for 1 second.

PREVENTING FALSE ALARM

1.

When you are away from home with the alarm system armed, dogs or cats

must not be allowed access to rooms protected by PIR movement detectors.

2.

Always disarm the system immediately on entry and ensure that children or

pets do not deviate from the entry route until the system has been disarmed.

3.

When going away do not turn off the electricity supply to the alarm.

WHAT HAPPENS IF THE ALARM OPERATES WHILST YOU ARE AWAY

The Siren will operate for a pre-determined time and then turn off to avoid noise nuisance.
The strobe will continue to flash until the system is disarmed.
The system will automatically re-arm after the siren has cut out.
To reset the alarm, if the alarm light is flashing, contact your alarm company. If the alarm
light is on constantly then enter your 'user code' followed by zero on the control panel. You
can now operate the system as normal.

USING THE 4173-GB REMOTE CONTROL

Full  arm

Press the Full set button for one second.

Part arm

Press the Part Set button for one second.

Disarm

Press the OFF button for one second.

Panic  Alarm Press the two outside (Off and Full) buttons for one second.

Battery low indication  -  When operating the remote control the green status indicator
illuminates. Low batteries in the 4173-GB unit will result in the green battery ok indicator
no longer illuminating.  Replace the battery as soon as possible or call your alarm
company.

Detection zones

Off

Full  arm
Part arm

Panic (See note)

Battery ok indicator

Reviews: