En-12
1-888-514-1663 |
WWW.OUTLANDLIVING.COM
1. Ensure the LP cylinder valve is CLOSED and the appliance gas
valves are “OFF”.
2. Ensure all gas system coupling joints are tight and properly
attached.
3. Prepare a leak testing solution of half liquid detergent and half
water.
4. CAUTION: ***SLOWLY*** turn cylinder valve to the open
position to avoid tripping the excess flow safety device in the
gas regulator. For more information about the excess flow
safety device see SECTION 5 (page 7) (What is an Excess Flow
Safety Valve? (EFV).
5. Apply the solution to the LP gas delivery system at points as
shown in illustration:
a) If parts of the fitting begin to produce bubbles, spray liquid,
or if you smell liquid propane gas, immediately close the
valve on the tank.
b) Wait 5 minutes for any gas to dissipate.
c) After waiting for 5 minutes, the leak(s) must be stopped
by tightening the loose joints, if possible, or by replacing
the faulty parts(s) with the part(s) recommended by the
appliance manufacturer.
WARNING:
If the information in this manual is not followed exactly, a fire
or explosion may result causing property damage, personal
injury or loss of life.
SECTION 7:
OPERATIONAL SAFETY (continued)
Appliance
Valve
Coupling
Gas
Regulator
LP Cylinder
Coupling
d) If no adverse reaction is observed and the connections all
seem fine then move to the ignition sequence.
6. If the leak persists, ensure the cylinder valve is closed,
disconnect the regulator hose and take the unit to a certified
propane technician for consultation.
IMPORTANT: Call OUTLAND for quick delivery of replacement
parts. DO NOT RETURN THE APPLIANCE TO THE RETAILER.
THE APPLIANCE IS NOT TO BE USED UNTIL ANY LEAK IS
CORRECTED.
A gas appliance repairman or LP gas dealer should be called if
attempts to stop the leak(s) are unsuccessful and, in such case, the
LP gas supply must be shut off at the cylinder valve or the cylinder
must be removed from the appliance until the leak(s) is corrected.
LEAK TEST: Apply the solution
to the LP gas delivery system at
points:
1. Appliance Valve Coupling
2. Gas Regulator
3. LP Cylinder Coupling
