FMN alpha EDGE HS, Instructions For Use Manual

14

15

For safety reasons, you should use HTTPS for the communication with the web 
interface since the data is transmitted encoded this way.

The web interface serves for the configuration, the control and the update of the 

alpha 

LTE/UMTS 4/EDGE HS

.  

For access to the web interface, all current browsers in their latest version are suitable. 
The web interface is accessible in the standard configuration over HTTP or HTTPS on the 
IP address 192.168.192.168:
(

https://192.168.192.168

 or 

http://192.168.192.168

).

In delivery state the 

alpha LTE/UMTS 4/EDGE HS

 isn’t protected by a password. The 

username is 

user

.

In addition to the access via web interface it is also possible to make changes on the 
device per ssh, scp or USB console.

Please note: 

Keep in mind that the configuration of the LAN interfaces is done that way that you 
can always access the 

alpha LTE/UMTS 4/EDGE HS 

over these interfaces.

Quick start

Insert your SIM card. In menu bar WAN settings you can choose the WAN mode (router or 
modem). If your SIM card is protected by a PIN unlock your SIM card by entering the cor-
rect PIN now and with an instant click to „Save settings“ at the end of the menu bar. After 
successful unlocking the SIM card, you can indicate access data automatically. 
Compare the automatically generated proposals with the data supplied by your provider.
If necessary make manual adjustments to APN, Authentication settings, IP settings and 
DNS settings. Confirm your settings with „Save settings“.
The 

alpha LTE/UMTS 4/EDGE HS

 independently generate a connection depending on 

the operation mode (WAN mode) and get an IP address from provider (router) or it is 
waiting for incoming PPPoE connections by connected devices.

In the menu bar under state it‘s possible to check your 

alpha LTE/UMTS 4/EDGE HS

 net-

work status. In the section network interfaces you can check if your device has obtained 
an IP address (wwan 0) by your provider. You can see in operation mode modem at the 
PPPoE state, if clients are connected. If a client is connected, the MAC address is display-
ed here.

Configuration

The current (set in the web interface) configuration can either be accepted directly, be 
saved on the 

alpha LTE/UMTS 4/EDGE HS

 or in a file. 

The configuration can be reset to different states. Apart from the reset to the last saved 
configuration, all other activities will lead to the overwriting of the saved configuration.
The configuration can be loaded from the 

alpha LTE/UMTS 4/EDGE HS 

or over a file 

upload.  
For applying the settings of a configuration, it has to be saved and the unit has to be re-
booted.

Startup