Operating Manual BKS015
26.11.2018
18
The data show in what operational state the device currently is.
A PLC can analyse the states and execute further actions.
Bit 0 set:
Automatic Operation switched on
Bit 1 set:
reserved
Bit 2 set:
reserved
Bit 3 set:
Web Guide or winderGLIDE actuator locked
Bit 4 set:
Web Guide or winderGLIDE actuator was driven to the center
Bit 5 and Bit 6 are not set:
Left edge guiding
Bit 5 set and Bit 6 not set:
Right edge guiding
Bit 5 and Bit 6 are set:
Centre guiding