Operating Manual BKS015
26.11.2018
20
second press for longer then 3 sec. on the PARA key will store
the value (ref. to 8.6 “Entering the Parameter Setting”)
Automatic or Manual. With this key you can select between
automatic or manual mode. The LED indicates the automatic
mode.
Drive to center position. The frame moves to the center
Position. This function is only available in manual mode.
In manual mode the frame will move to the left in 0.1mm
steps by pressing the button once. By pressing the button
longer than 1 sec. it will continuously move the frame to the
left.
In automatic mode the Reference Position will be adjusted to
the left in 0.1 mm steps by pressing the button once. Pressing
the button longer than 1 sec. it will continuously move the
Reference Position to the left (see chapter 8.4 “Operation in
Automatic Mode).
In parameter setting mode: Pr
essing the button reduces
continuously the parameter value.
In manual mode the frame will move to the right in 0.1mm
steps by pressing the button once. By pressing the button
longer than 1 sec. it will continuously move the frame to the
right.
In automatic mode the Reference Position will be adjusted to
the right in 0.1 mm steps by pressing the button once.
Pressing the button longer than 1 sec. it will continuously
move the Reference Position to the right. (see chapter 8.4
“Operation in Automatic Mode).
In parameter setting mode: Pressing the button increases
continuously the parameter value.
Fig. 13: Table of key functions
Note
To make the settings easier for the operator, there is visual help in form of LED row.
The pattern on the LED row indicates the setting range (ref. to chapter 8.7
“Description of the LED row).