Contact: Rita Cai Email:
rita@fmuser.net
Web: www.fmuser.net skype: rita.cai87
Operation Attentions:
1. Make sure the antenna or the Load can be ground connected to transmitter
2. The power supply voltage must be within the allowed range.
3. Make sure the fan ventilation is good.
Operation step:
1. Power on
2. Function and Parameter setting
1) Frequency setting
2) Line volume setting
3) Power setting
4) Audio mode setting
5) Temperature protection setting
6) VSWR protection setting
7) Microphone volume setting
8) Shorcut:
There are 4 shortcut button for easier and fasting parameter setting:
FREQ
：
Frequency setting
LINE
：
Line Volume setting
RF-PWR
：
Power setting
MIC
：
Microphone Volume setting
Operation Instruction:
1.
Attention for POWER ON/OFF:
l
Make sure the antenna or RF load is properly connected to the transmitter
l
Make sure the supplied voltage is within allowed range.
l
Make sure ventilation is good.
2.
POWER ON
。
Press the power button to “I” to turn on the power. “O” means POWER OFF. See
picture below:
