FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物技术开发有限公司
16
/
39
by moving the LEFT/RIGHT key and then repressing ENTER to confirm.
J.83A (DVB-C) contains 8MHz, 7MHz, 6MHz;
J.83B contains 6MHz;
J.83C contains 6MHz;
4.3.2.6 RF Level Setting
After entering the submenu by pressing ENTER key, user can set the RF Level
by moving the UP/DOWN/LEFT/RIGHT key and then repressing ENTER to
confirm.
The total RF range is from 6 to -25db in 0.5db step.
4.2.3 Input Setting
User can select “Input setting” in the main interface and then press ENETR to
view the inputting ports. The display show as below:
The setting principle is the same for 2.1 to 2.6 turner input port. Hereby we just
take Port 1 as an example to illustrate.
User can choose Port 1 in the submenu by pressing ENTER, and the display
shows as below:
►
1.5 Bandwidth J.83A/DVB-C
*8MHz 7MHz 6MHz
►
1.6 RF Level
+00.0 dbm
►
2.1 Port 1(DVB-S2) 2.2 Port 2(DVB-S2)
2.3 Port 3(DVB-S2) 2.4 Port 4(DVB-S2)
: :
: :
: :
2.7 Port 7 (ASI) 2.8 Port 8(ASI)
2.9 Port 7 (ASI) 2.10 Port 8(ASI)
►
2.1.1 Prog Parse
2.1.2 Sat Freq Set
2.1.3 LNB Freq set 2.1.4 Symbol rate
►
2.1.5LNB Voltage
2.1.6 1.6 22KHz Switch
