11 of 13
Assembly instructions
The horizontal arm of Balancer should be positioned slightly above the user’s head.
The position of the housing with the spring mechanism depends on the available space. It’s important
that you do not select a setting that brings about an unfavourable horizontal arc (the range of the
rotating arm). The technician can adjust this range.
Warning:
When installing Balancer, you should take note of the horizontal
(sideways) range of the horizontal arm. At all times this needs to stay
within the dimensions of the wheelchair. This is because the horizontal
arm might otherwise get jammed in a doorway or narrow opening and
cause irreparable damage.
Maintenance instructions
Maintenance of physical components
All housings and the cord must be inspected on a regular basis. If these parts are visibly damaged, the
device should not be used. It is not permitted to make any alterations to Balancer. There are no
components in Balancer which can be maintained by parties other than Focal. Please contact Focal if
you have any questions about maintenance. When Balancer is not mounted on its mounting unit, the
device should always be stored in its box. This is so that the effects of falling or other mishaps can be
avoided that might damage the system.
Cleaning
Balancer requires limited maintenance. Balancer can be cleaned using a damp cloth and a non-
aggressive cleaning agent.
Recycling
Balancer needs to be taken apart by a professional. Balancer then needs to be cleaned and inspected
intensively. The arm-fitting must be replaced.
