FOCAL MANAGER DSA 500 RT EXPERT PERFORMANCE
U s e r m a n u a l
12
The right-hand area contains the parameters for the front channels. The horizontal potentiometer is used to adjust the
cutoff frequency for the high-pass crossover. The vertical gain is used to adjust the sound volume of the front channels.
(fig. 16)
(fig. 16)
,1'(7$,/
The high-pass crossover is used to adjust the quantity of bass frequencies received by the front speakers.
Increasing this frequency can often limit vibration in the vehicle doors, and increase the maximum sound pressure
possible in the car
.
Ì
The more a speaker is used at low frequencies, the more it is subjected to significant elongations. It is often
better to use a speaker solely for the frequency range for which it is actually effective. If you force a speaker to handle
frequencies too low for it, there is a risk that the speaker may break prematurely.
86()8/8VHWKHVWHSSHUWKHDUURZVRQ\RXUNH\ERDUGRUWKHGDWDHQWU\ER[IRUILQHWXQLQJ
(fig. 17)
(fig. 17)
!
