A S S E M B L Y I N S T R U C T I O N S
2
GB IE
1.0 IMPORTANT NOTES
© 2014 Focal Point Fires plc.
Section
1.0
2.0
3.0
4.0
5.0
6.0
7.0
Contents
Important notes
Tools required
Hardware & parts list
Assembly
Installation
Cleaning/ finishing
Guarantee - terms and conditions
Page No.
2
2
2
3
4
4
4
2.0 TOOLS REQUIRED
CODE
NAME
FIGURE
QUANTITY
A
SCREWS
(8X32mm)
12PCS
B
SCREWS
(6X20mm)
4PCS
C
WALL
SCREWS
(8X38mm)
2PCS
D
WALL PLUGS
(6X25mm)
2PCS
E
MIRROR
PLATES
(45X43mm)
2PCS
3.0 HARDWARE & PARTS LIST
CODE
NAME
FIGURE
QUANTITY
①
MANTLE
SHELF
1PC
②
LEFT LEG
1PC
③
RIGHT LEG
1PC
To ensure safe and stable installation:
1. The assembled Fire Surround must be fixed / secured to wall.
2. The wall must be sturdy and in good repair.
3. Some walls require alternative fixings (not included).
4. When drilling into the wall, check for hidden pipes and cables.
5.There are two options for construction of this surround.
A - with rebates - If you are installing this surround with a gas fire, or an electric fire where there is space in the wall to recess
the fire use parts 4 & 5, this means the laminate / marble is up against the wall.
B - with out rebates - If using this surround with an electric fire and a flat wall do not use with rebates, instead use the spacer
frame from the fire.
Cross head screwdriver PZ2 (3 inches in length or greater)
Drill, 6mm and a 2mm suitable drill bit
Pencil
Tape measure
