I) Remove the screw hole covers. As shown in Figure 18.
IMPORTANT: the screw cap and screw hole covers should be retained
for use on the opposite side of the appliance.
K) Refit the freezer door. As shown in Figure 19.
Reinstall the middle door hinge on the opposite side from its original
position.
IMPORTANT: The hinge pin should be fixed in the position shown in the
photograph.
L) Refit the refrigerator door and install the new door hinge bracket (part
of the fixing kit). As shown in Figure 20.
Figure 21 shows the new left side top hinge which is part of the
fixing kit and the original hinge bracket. Remove the hinge pin
from the right hinge and reuse on the left hinge.
16
©
2013 Focal Point Fires plc.
8.3 REVERSING THE RD-270REU DOORS
- CONTINUED
GB IE
Figure 18
Figure 19
Figure 20
Figure 21
Downloaded from
www.Manualslib.com
manuals search engine
