8
Handler I, II & III Operator’s Manual - October 2008
whenever working with the Handler or on a machine or a
component containing toxic product.
Keep all shields and guards in place when operating.
Clear the area of all bystanders, especially children, before
starting.
Review safety instructions annually
Safety Decals
Keep safety decals and signs clean and legible at all times.
Replace safety decals that are missing or have become illeg-
ible.
Replaced parts must have current safety decal.
Safety decals or signs are available from your dealer parts
department.
How to Install Safety Decals
Be sure that the installation area is clean and dry.
Decide on the exact position before you remove the backing
paper.
Remove the smallest portion of the split backing paper.
Align the decal over specified area and carefully press the
small portion with the exposed sticky backing in place.
Slowly peel back the remaining paper and carefully smooth
the remaining portion of the decal in place.
Small air pockets can be pierced with a pin and smoothed
out using the piece of decal backing paper.
Safety Decal Information
The types of decals on the equipment are shown in the illustra-
tions below. Good safety requires that you familiarize yourself
with the various safety decals, the type of warning and the area,
or particular function related to that area that requires your safety
awareness.
•
•
•
•
•
•
•
1.
2.
3.
4.
5.
6.
Handler safety decals
Think Safety! Work Safely!
Summary of Contents for Handler I
Page 2: ......
Page 48: ...48 Handler I II III Operator s Manual October 2008...
