10
When . mixing, . you . can . connect . an . additional . pair . of . reference . monitor . speakers . to . .
LINE OUTPUTS 3 .and .4 .allowing .you .to .check .your .mix .on .different .types .of .speaker. .By .default, .
these .outputs .do .not .carry .the .same .stereo .signal .as .LINE OUTPUTS 1 .and .2. .If .you .wish, .you .can .use .
Focusrite .Control .to .route .the .same .stereo .signal .feeding .LINE OUTPUTS 1 .and .2 .to .these .outputs.
Main
Monitor
Speakers
Additional
Monitor
Speakers
IMPORTANT: .
LINE OUTPUTS 1 .and .2 .incorporate .“anti-thump” .circuitry .that .protects .your .speakers .
if .the .Clarett .2Pre .is .turned .on .while .the .speakers .(and .amplifier .if .used) . .are .connected .
and .active.
LINE OUTPUTS 3 .and .4 .do .not .have .this .circuitry.
If .you’re .using .additional .speakers .connected .to .these .outputs, .we .recommend .that .you .
power .your .Clarett .2Pre .on .first, .
then .turn .on .the .speakers .or .power .amplifier. .But .get .
into .the .habit .of .following .the .general .rule .in .any .case .- .it .is .
always .good .audio .practice .
to .turn .on .a .speaker .system .of .any .kind .
after .turning .on .the .equipment .feeding .it.
Summary of Contents for Clarett2Pre
Page 1: ...User Guide FFFA001255...
