Focusrite Clarett2Pre User Manual Download

Page: 11 / 18

Examples of Usage

The . Clarett . 2Pre . is . an . excellent . choice . for . numerous . recording . and . monitoring . applications. . .

Some .typical .configurations .are .shown .below.

1. .Recording .a .solo .artist

This .setup .illustrates .a .typical .configuration .for .multitrack .recording .with .DAW .software .on .your .

computer.

In .this .case, .two .sources .– .a .microphone .and .a .guitar .– .are .connected .to .the .Clarett .2Pre’s .inputs. .

As .the .guitar .is .connected .to .Input .2, .ensure .that .INST .mode .is .selected .for .Input .2 .from .Focusrite .

Control, .and .that .the .INST .LED .is .illuminated.

The .connection .to .the .computer .running .DAW .software .is .via .a .Thunderbolt™ .cable. .This .will .carry .

all .the .input .and .output .signals .between .the .DAW .and .the .Clarett .2Pre. .Once .the .audio .setup .is .

correctly .configured .in .the .DAW, .each .input .source .will .be .available .for .recording .in .the .DAW.

A .mix .of .the .recorded .tracks .will .be .available .at .Line .Outputs .1 .and .2, .so .that .you .can .hear .the .results .

on .the .speakers. .

Summary of Contents for Clarett2Pre


















