4
ENGLISH
Operating system compatibility
Windows
Macintosh
Windows XP (SP3), Vista, 7
OSX 10.5 Leopard (Intel only, PPC not supported), OSX 10.6 Snow Leopard.
For more information on compatibility visit www.focusrite.com/vrm_box
Installing the software
The VRM Box is a class compliant device, meaning that there is no need to install drivers for the device to work as an audio output. However, you
must run the installer to be able to use the VRM software.
Insert the CD into the computer and click on the installer icon. Follow the instructions on screen to install the VRM Control Panel software and
drivers.
Note
for
Windows users: If this message or similar appears during the installation process,
press ‘Continue Anyway’ to successfully install the drivers.
VRM Box hardware setup
The VRM Box can be used as the main audio interface, or in conjunction with your existing audio interface, providing this interface
has a RCA S/PDIF output.
VRM Box as the main audio interface
1.
Using the USB cable provided, connect the VRM Box to the USB port of your computer
2.
Set up the VRM Box as your audio playback device
To use the VRM Box as the playback device of your DAW software you will need to select the VRM
ASIO driver (Windows) or VRM Core Audio driver (Mac) in the audio settings of your DAW software.
For more information please refer to page 8.
3.
With the volume control turned down, connect your headphones to VRM Box
4.
Load the VRM software. This can be found in your Applications folder (Mac) or from the Start menu > All Programs > Focusrite (Windows)
5.
Start playing audio from your DAW software or any media player
6.
Turn up the volume control on the VRM Box until you have a healthy level in your headphones
USB
USB / FireWire
USB
S/PDIF
OUT
IN
Windows
Mac
