- 11 -
MODEL: FC-ROQ/DUAL3
Instruction Manual
a) When changing the gas cylinder which shall be carried out away from
any source of ignition. Position the gas cylinder at left side of your gas grill,
should not be placed inside BBQ, keeping in mind that the gas cylinder must
be kept away from heat and in a safe position.
b) When ready to use your gas grill insert the regulator into the gas cylinder
WARNING
Before attempting to light your gas grill you must refer to your
lighting instructions and warning / safety precautions.
Check the hose before each use, searching for cracking, cuts or any abrasions. If
the hose is found to be faulty in any way do not attempt to use your gas grill.
When changing your gas cylinder ensures that there are no sources of ignition
close by i.e.
cigarettes, naked
etc. Make sure that the appliance is
The appliance only can use liquid gas cylinder as per Technical Data Label. The
gas cylinder should meet the national requirement.
Gas Cylinder
Regulator
Gas connector
Operation
Hose
CONNECTING THE GAS CYLINDER:
Gas connector
Hose
Hose
Regulator
Gas cylinder
a) The gas cylinder must not be exchanged near any source of ignition. Position the gas cylinder
to the left of your gas grill. Do not place the gas cylinder inside the grill. Keep in mind that the
cylinder must always be safely positioned and kept away from heat.
b) When you are ready to use your gas grill, insert the regulator into the gas cylinder valve and
WARNING
Please refer to the lighting instructions and warnings / safety precautions before attempting
to light your gas grill.
Before each use, check the hose for any cracks, cuts or abrasions. Do not use your gas
. Make sure that the
gas cylinder complies with the applicable national regulations.
Make sure your grill is assembled properly. Detailed assembly instructions
are packed with each grill giving
assembly procedures for each model.
Follow these instructions carefully to ensure the correct and safe assembly of the
grill.
CAUTION
lthough we take every effort to ensure that the assembly process is as
easy as possible, it is inherent with fabricated steel parts that corners
and edged can cause cuts if improperly handled during assembly
procedures. Be careful while handling any parts during assembly. It
is strongly recommended that you protect hands with a pair of work
gloves.
TOOLS NEEDED, NOT INCLUDED
A
M4 x 8mm
x 2
B
x 54
C
M6 x 10mm
x 2
Washer
D
x 2
R pin
Parts List
GB
- 12 -
a) The gas cylinder must not be exchanged near any source of ignition. Position the gas
cylinder to the left of your gas grill. Do not place the gas cylinder inside the grill. Keep in
mind that the cylinder must always be safely positioned and kept away from heat.
b) When you are ready to use your gas grill, insert the regulator into the gas cylinder valve
and tighten the connection firmly.
WARNING
Please refer to the lighting instructions and warnings / safety precautions before
attempting to light your gas grill.
Before each use, check the hose for any cracks, cuts or abrasions. Do not use
your gas grill, if you find the hose to be faulty in any way.
When replacing the gas cylinder, make sure that there are no ignition sources
(such as fire, cigarettes, open flames, etc.) nearby, and that the appliance is
switched off.
Use liquid gas cylinders as specified on the technical data label only. Make sure
that the gas cylinder complies with the applicable national regulations.
