Instruction Manual
MODEL: FC-ROQ/DUAL3
If you cannot use automatic ignition, please remove the cooking grill and heat diffuser
(hotplate). Then turn the valve anticlockwise to 90° to light the flame using a barbecue
lighter held to the burner fire hole at a distance of 5 mm. Now replace the cooking grill and
heat diffuser (hotplate). Please wear fireproof and heat resistant gloves.
WARNING
If the burner still does not light, turn the burner control knob to “OFF” and wait for 5 minutes
to let the gas clear, before you make another attempt to light the gas grill.
4.5 CHARCOAL SIDE BBQ INSTRUCTIONS
a) It is not advisable to completely fill the charcoal tray as the barbecue may become far too
hot to cook successfully.
b) Line the charcoal tray with aluminium cooking foil, shiny side up, to make it easier to clean
your barbecue after use. Leave ventilation holes by piercing the foil where necessary, this
process will lengthen the life of your barbecue.
Use the ventilation holes on the top and the side of the BBQ to control the temperature
during cooking.
c) Turn the handle to move the charcoal tray up and down to heat the food more efficiently
and control the cooking of your food.
d) To clean your grill, soak the cooking grill and tools in hot soapy water when the barbecue
is completely cool as soon as possible after use.
e) When you have finished cooking, never pour cold water directly on the coals to extinguish
them as this may damage your grill. Use old cinders, sand or a fine water spray.
CONNECTING THE GAS CYLINDER
MODEL: FC-ROQ/DUAL3