background image

MARKINGS AND DEFINITIONS

 

 

DANGER

This term is used to denote high-risk hazards which, if not prevented, can 
result in death or serious injury.

 

WARNING

This term is used to denote medium-risk hazards which, if not prevented, 
can result in death or serious injury. 

 

CAUTION

This term is used to denote low-risk hazards which, if not prevented, can 
result in minor or moderate injury.

  

DANGER

To avoid risk of injury or death, please make sure that anyone involved in 
installing, operating or dismantling the system has read this user manual.

  

WARNING

To prevent any potential injury caused by the system falling down,

•  it must be firmly fixed to building structures according to the 

mounting instructions. Please also ensure that these structures 
combined with the equipment used for system deployment have 
sufficient load-bearing capability and are structurally suitable. 
Only use the recommended 

FOHHN

 accessories with this product, or 

other components that have been explicitly specified in this manual.

•  it must be regularly checked for any signs of wear or loosened parts 

on load bearing connections.

To minimize the risk of fire or electric shock,

•  the system should not be opened: It does not contain any parts to 

be maintained by the user. For maintenance requirements, please 
consult a qualified technician. 

•  items that have a naked flame (such as candles) should not be placed 

near the system.

 
To avoid injury, this product must be taken out of operation, appropri-
ately marked and secured against unauthorised use if

•  it shows any visible signs of damage.
•  there is any indication of loose parts.
•  it does not work properly.
•  it has been subjected to poor transportation conditions (e.g. with un-

suitable packaging).

1. IMPORTANT SAFETY INFORMATION 

 
Please read the following safety information carefully before using the system. This information should be kept handy for 
future reference. Reading this manual does not replace the need for awareness and observation of all current local safety 
regulations, legal requirements and compliance with safe working methods at the venue.
The following information and technical specifications have been based on data that was available at the time of publica-
tion. We expressly reserve the right to make changes as necessary.

To avoid injury

•  this product must not be stored, installed or operated in reach of 

children.

 

 

To prevent hearing damage caused by excessive sound pressure levels, 
do not

•  stand directly in front of a loudspeaker, that is ready for operation, 

without wearing ear protection.

•  subject yourself to high sound pressure levels over a long time period.

  

CAUTION

To prevent damage to the product, please avoid the following: 
•  acoustic feedback 
•  high powered, permanently distorted signals

1.1  

CONNECTIONS AND CABLING

 
Cables form the vital links between the different components in an audio 
system.

Please make sure that your cables are in perfect working order. Only use 
branded cables of an appropriate cross section!

Speaker cables must be laid and secured in a way that they cannot be 
harmed by tools or jammed and damaged by the loudspeaker or wall 
brackets.

Wiring of loudspeaker must be solely executed by skilled personnel. We 
recommend using ferrules for stranded wires.

Avoid excessive torque to the terminal screws!

IMPORTANT SAFETY INFORMATION

 | ENGLISH

15

Summary of Contents for LINEA LC Series















Reviews: