background image

5.9 Controls for Sub 

active

 

(see page 34)

All controls are fitted flush to the brushed 
aluminium back plate for protection. The 
amplifier is cooled via the back plate. The back 
plate is usually only 14°C warmer than the 
ambient temperature.

The temperature and speed-controlled fan provide extra cooling 
if the ventilation conditions are unfavourable or the ambient 
temperatures are extreme, e.g. direct sunlight. The fan is not usually 
required during normal operation and is therefore switched off.

The two multifunctional tops are connected to output jacks 
(4) and (5). Plug & Play. You can connect up to two tops per 
channel (ch1 and ch2). 
Observe the minimum impedance of 4 ohms!

Output jack (5) has no function in bridge mode.

Speakon configuration ch2 (5): Top: 1x/1-, Sub: 2+/2-

Advice:
to connect a X-Sub passive (slave) with XS-10, XS-20/22 or 
XS-30 only use 4-core speakon loudspeaker cable!
Connecting a X-Sub passive to a XS-4 is not possible!

Output jack ch2

(5)

Connect your mixing desk to the input jacks (8) and (6). The 
Neutrik multifunctional jacks allow flexible use of XLR and 
jack connectors. The lockable XLR jack provides you with a 
very secure connection - the lock prevents the unit from being 
unplugged unintentionally during operation. 

In bridge mode, the input jack (6) has no function.

Input jack ch2

(6)

Connect your mixing desk to the input jacks (8) and (6). The 
Neutrik multifunctional jacks allow flexible use of XLR and 
jack connectors. The lockable XLR jack provides you with a 
very secure connection - the lock prevents the unit from being 
unplugged unintentionally during operation.

Bridge mode

 (XS-30 and XS-4 only)

In Bridge mode with 2 Subs XS-30 or XS-4, the two mixing 
desk signals (left and right) are each connected to the input 
jack (8) for the two Subs.

Input jack ch1

(8)

The input signal is available unchanged at XLR link jacks (9) 
and (7) and can be transmitted to other devices.

Bridge mode

 (XS-30 and XS-4 only!)

In bridge mode with 2 Subs XS-30 or XS-4, the two mixing 
desk signals (left and right channels) are each connected to 
the input socket (8) for the two Subs. As a result, only the link 
jack ch1 (9) is available for transmitting the relevant signal.  

Link jack ch1

(9)

from

X-Sub active

Xperience

min.

impedance

4 ohms

German quality.

Engineered and

made in Germany.

XSP-2

power handling 500W

Xover 130 Hz

X-Sub

passive

top

passive

+1

-1

+2

-2

speakon: top 1+, 1- / sub 2+, 2-

To connect

X-Sub passive with

X-Sub active only use

4-core speakon

loudspeaker cable!

Xperience system wiring

use 4-core

cable

X-Sub

passive

(slave)

!

speakon

1+, 1-

speakon

2+, 2-

speakon

1+, 1-

from external

amplifier /

powermixer

input

input

output

 from Xperience

to sat-speaker

www.fohhn.com

‚®

X-Sub passive

32

31

30

output ch2

Main jack

Used to connect the supplied IEC mains cable. Powercon mains 
jack: for lockable Powercon mains plugs. A significantly safer 
mains connector - the Powercon plug and jack connector 
prevent the unit from being unplugged unintentionally during 
operation. 

While the power-switch (2) is turned off, the 

thru (16) connector still provides the mains voltage.

 

Fohhn Mains Control 

is a mains supply monitoring system. 

During use, the supply to the amplifier is constantly monitored. 
If at any time it exceeds the maximum permitted range (180-
255VAC), the supply will be interrupted. It also minimizes the 
effect of any initial input surge during power up. Mains Control 
does not switch off the thru (16) jack.

(1)

Actuating the Power on/off switch starts up the amplifier, 
the switched-mode mains and the DSPs in soft-start mode. 
The speakers are then activated and the status LEDs for ch1 
(13) and ch2 (14) light up green - your system is ready for 
operation.

Power switch (on/off)

(2)

The two multifunctional tops are connected to output jacks 
(4) and (5). Plug & Play. You can connect up to two tops per 
channel (ch1 and ch2). 
Observe the minimum impedance of 4 ohms!

Bridge mode

 (XS-30 and XS-4 only)

In bridge mode with 2 XS-30 or XS-4, each of the two 
multifunctional Tops is connected to the output jack (4) for 
the two Subs. 

Please remember that only 1 Top can be connected to each 

Sub XS-33 or XS-4 in bridge mode! If an operational error 

occurs, the amplifier switches to Protect (protect LEDs for 

ch1 (13) and / or ch2 (12) light up red)

Speakon configuration:

Output port ch1

(4)

FP2

slave

power handling 120 W

impedance 8

Ω

dispersion 80

°

x80

°

2-way passive operation

speakon 1+ / 1-

circuit diagram

speakon cable 1+ / 1-

Engineered and made in Germany.

DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE.

!

ONLY USE WITH:

FP2

pro

 OR FP2

CD

READ MANUAL & SAFETY

INSTRUCTION BEFORE USE!

input 

from

FP2

pro

 

or

 FP2

CD

+1

-1

+2

-2

speakon

1+ / 1–

Slave

input

FP2

slave

+

-

battery

12 V

Master

output

FP2

pro

FP2

CD

40

Possible to connect an additional Sub. Max. 2 Subs per supply 
lead. 

While the power-switch (2) is turned off, the thru 

(16) connector still provides the mains voltage.

Mains socket thru (16)

(16)

Fohhn | 35

Summary of Contents for Linea LX-11

















































Reviews: