RCY21208
User’s Manual
Rev.: 03
Date: November 4, 2007
Page 4/8
www.foehrenbach.be
Close the hand tool till you observe the first ‘click’ of the ratchet. Introduce the
stripped wire. Push the wire till it touches the wire stop. For obtaining the striping
length, please refer to the contact application specification.
Keep the wire fixed in position and activate the levers till they reach the end
position.
Release the levers and pull out the crimped contact.
4. Adjustments
- The tool is adjusted by Föhrenbach Application Tooling engineers. In order
to maintain the performance of the tool, don’t carry out any adjustments.
- For any support, please contact Föhrenbach Application Tooling:
Föhrenbach Application Tooling
Krijgsbaan 128
B – 2640 Mortsel
Belgium
