INSTRUCTIONS
5
Batteries Already Installed
Manual Mode - No Brakes
The Heavy-Duty model comes with two lithium-ion batteries. We
ship the batteries with your wheelchair. We have already placed each
battery inside the frame of the chair. You do not need to remove the
batteries in order to charge the chair. You can charge both batteries at
the same time, by plugging the charger into the joystick.
Move the red lever on the inside of each rear wheel motor, push it
forward until you feel a click. Then the wheel will spin free, so the chair
can be pushed just like a manual chair. Repeat the same process for
both wheels.
1.
3.
How to Install & Operate
Joystick Installation
Power Mode - Electromagnetic
The Joystick can be mounted on the left or right side armrest. Insert
the Joystick into the tube of the armrest. Tighten the Thumb Screw
bolt on the bottom-side of the armrest. Make sure this bolt is snug to
hold the Joystick in place.
Move the red lever on the inside of each rear wheel motor, pull it
backward until you feel a click. Then the wheel motor will be engaged
and power will move each wheel. Repeat the same process for both
wheels.
2.
4.
