Page 3
Introduction
Introduction
Congratulations on your purchase of the TEW007 powerchair. This powerchair incorporates the latest innovative designs.
The TEW007 powerchair can be used in confined spaces both indoors and out. The powerchair can be easily folded
without tools and will fit into the boot of vehicles for easy transport or stored neatly indoors.
Intended Use
The TEW007 powerchair was carefully designed for indoor or outdoor use in paved pedestrian areas by a single
individual with limited mobility up to a maximum weight of 100 kg.
Your assessor/healthcare professional will determine the suitability of the powerchair for each individual’s intended
use.
Note: Persons with lower body amputations should not use this device unless evaluated with artificial limbs fitted, as
stability may be compromised due to an irregular centre of gravity.
Key Features
1. Lightweight frame design
2. Rear wheel drive configuration ensures stability and reliability of driving.
3. Advanced controller, easy operation system.
4. Comfortable, ergonomically designed seating
5. Easily foldable for transportation and storage.
6. Powerful lithium battery pack. (NOT suitable for airline travel as is greater than 300Wh)
Technical Specification
Class 1 Medical Device (93/42/EEC as amended by 2007/47/EC)
Class 2 Indoor/Outdoor Vehicle (Use of Invalid Carriages on Highways Act)
Parameter
Measurement
Parameter
Measurement
Max Speed
4 mph
Max Width
63 cm
Max Range *
12 Miles
Overall Height
99 cm
Total Weight
29 kgs
Overall Length
103 cm
Battery
20Ah Lithium Ion
Castor size
8 "
Motor
200W x 2
Drive Wheel size
12" (10")
Controller
PG VR2
Safe working slope
6
º
Operational Environment
-15 to 50
º
C
Climbing capacity
> 40 mm
*Passenger weight, rough ground conditions, low temperatures and battery condition can affect maximum range
Summary of Contents for TEW007
Page 4: ...Page 4...
