Page 6
Putting your chair in and out of Freewheel mode.
To put you chair in or out of freewheel mode you need to release or apply the clutch levers located on the 2 motors at
the rear of the chair. When the lever is moved to the open position this deactivate the electro-magnetic braking
system putting the chair into freewheel mode and allowing the wheelchair to be manually pushed by an attendant or
third party. When the clutch lever is fully engaged the electromagnetic system will prevent the chair from being
freewheeled
Warning: Always check that your chair is out of freewheel mode before you sit down in it to as the brakes will
not be in place.
Summary of Contents for TEW007
Page 4: ...Page 4...
