3 . OPERATION
5
4
3
1
2
6
7
8
9
3.1 JoysVck and Controller
1.
On/Off BuXon
2.
Factory Maintenance BuXon
3.
BaXery Strength Indicator
4.
Speed Indicator
5.
Increase Speed
6.
Decrease Speed
7.
Horn
8.
Joys2ck
9.
Maintenance Light
3.2 How to operate your power wheelchair
Turn on the power to the wheelchair by pressing the On/Off buXon,
DO NOT
MOVE THE JOYSTICK UNTIL THE POWER IS ON.
v
Speed Indicator
Level 1 is the lowest speed, and Level 5 is the highest speed. Every 2 lights
represents 1 level.
Warning: We recommend that you become thoroughly familiar with the
operaVon of your Foldawheel PW-‐999UL before you increase the speed
seXng from level 1 to a higher speed level.
Page 6
v
On/Off Bu]on
The On/Off buXon provides power to the electronic control system, which
in turn supplies power to the wheelchair’s motor. Do not use the ON/OFF
buXon to stop the wheelchair unless there is an emergency. The joys2ck
controller will automa2cally turn off the power aaer 15 minutes of
inac2vity.
Sugges2on: Please power off whenever wai2ng. To preserve energy.
Warning:
If you use the ON/OFF buXon to stop the wheelchair, it may shorten
the life of the drive components.
v
Speed control Increase and Decrease Bu]on
Press the “ + ” buXon on the joys2ck controller to increase the speed.
Press the “ -‐ ” buXon on joys2ck controller to lower the speed.
