FS-PD2001-GM
Bottom view
Installation steps
1. Before installation, please check the following equipments and accessories, if there are any missing, please contact with your supplier.
1). 1pc FS-PD2001-GMdevice
2). 1pc user manual
3).1pc power line
2. Please install as below steps
1)
Before installation, please turn off the power of all signal sources and the monitor in case of the damage to transmissiondevice.
2)
Use network cables to connect PoE power supply device and RJ45 port of PD splitter
3)
Connect DC connectors and RJ45 port with right powered device.
4)
Check weather installation is correct and the device undamaged. Before power on PoE device, make sure that all connections are reliable.
Technical Specification
Features
Standard
Support IEEE802.3af/at
Power supply mode
Support Mid-span and End-span
PoE Input Voltage
37-57V
DC Voltage Output
12V or 24V
Max DC Current Output
2.0A(12V output voltage);1.0A(24V output voltage)
