20.75" (52.7 cm)
22.75" (57.8 cm)
13.00"
(33.1 cm)
4.875"
(12.4 cm)
2.375"
(61 mm)
1.875" (48 mm)
7.00" (17.8 cm)
A
A
B
B
F
F
D
E
C
A
B
C
C
17.00"
(43.2 cm)
Front view — air-cooled
RIDE model
Side view — air-cooled and water-cooled
top mount and RIDE model
RIDE model air-cooled units only
Back view — air-cooled
top mount
Front view — water-cooled
RIDE model
Back view — water-cooled
top mount
12.875"
(32.7 cm)
4.75"
(12.1 cm)
8.375"
(21.3 cm)
2.25"
(57 mm)
1.875" (48 mm)
Front view — air-cooled
top mount
Ice machine plug
configuration
NEMA 5-20
6.875"
(17.5 cm)
2"
(51 mm)
Dimensions and clearances
§
Entire front of ice machine must be clear of obstructions/connections to allow removal.
§
12" (30.5 cm) clearance above ice machine for service.
§
6" (15.3 cm) minimum clearance between exhaust side of ice machine and any adjacent equipment.
§
MCD400A & R400A – 18" (45.7 cm) minimum, 10 ft (3 m) maximum clearance between discharge and air
intake grilles.
A – 3/4" MPT drain
B – 3/8" OD push-in water inlet
C – Electrical cord
D – 3/8" FPT condenser inlet
E – 3/8" FPT condenser drain
F – Bin signal cord
T400A/W, MCD400A/W, R400A/W, MFD400A/W, D400A/W Ice Machines 7