463
Continued on next page
Netw
ork Ser
vices
Service Dialing Number
This function provides a quick and simple way to
contact the DoCoMo general help desk and
service counter for information on faults, etc.
1
i
“Service dialing
number”
Handling Calls Received During a Call
Use this procedure to specify how voice calls,
videophone calls and 64K data communication
that arrives during a call are handled.
●
If you have not subscribed to “Voice mail” service
or “Call forwarding” service, received voice calls
are not transferred to the Voice mail service
center or forwarding number.
Specifying how calls received during another calls
are handled <Arrival call act>
1
i
“Arrival call act”
Select any item:
Activating the settings for handling calls
received during another call <Set arrival act>
●
You cannot specify this setting where “
”
appears.
1
i
“Set arrival act”
Select any item:
Ending the current call or 64K data
communication to answer a received call
●
When the current and incoming calls
are the same type
<Example: Ending the current voice call to
answer a received voice call>
1
When you hear the double tones
(repeated soft double-beeps),
press
y
This ends the current call and the FOMA terminal
starts ringing.
Item
Description
ドコモ故障問合せ
Calls the DoCoMo service
desk.
ドコモ総合案内・受付
Calls the DoCoMo general
information desk.
NOTE
●
You can only use this function if the contact numbers
for the DoCoMo general information desk and service
desk are stored on the FOMA card (UIM).
●
The screens shown and dialed phone numbers may
differ depending on the FOMA card (UIM) used.
Item
Description
Voice mail
Transfers voice calls received during a
call to the Voice mail service center
regardless of the “Call waiting” and
“Voice mail” service settings.
Call
forwarding
Transfers voice and videophone calls
received during a call to the forwarding
number regardless of the “Call
waiting” and “Call forwarding” service
settings.
Call rejection
Rejects voice and videophone calls
and 64K data communication received
during a call.
Default setting
Answer
Answer
If “Call waiting” is activated and a
voice call is received during another
voice call, the call received later is
handled according to the “Call waiting”
setting. If call waiting is not activated
or during a videophone call or 64K
data communication, call can be
handled in any of the following ways:
・
You can end the current voice or
videophone call or 64K data
communication, and answer the
received voice or videophone call or
64K data communication.
・
You can use the function menu to manually
handle a voice call, videophone call or 64K data
communication received during a call.
→
P.464
・
If “Voice mail” service or “Call forwarding”
service is activated, calls can be handled
using those service settings.
Item
Description
Activate
Activates “Set arrival act” setting.
Deactivate
Deactivates “Set arrival act” setting.
Status
request
Shows the current setting.
NOTE
●
To set up or check this function, use a FOMA terminal
with your own FOMA card (UIM) inserted. You cannot
remotely operate this function from a general phone,
payphone or another mobile phone.
●
If you are subscribed to “Voice mail” service or “Call
forwarding” service, this function is set to “Activate”.
●
When you receive a voice call, videophone call or 64K
data communication during a call, the incoming call
screen may appear before the call is connected to the
Voice mail service center or forwarded to a forwarding
destination even if “Voice mail” or “Call forwarding” is set.
Item
Description
Summary of Contents for N901iS
