o
In case of an
overexposed
photograph, press the
„
-
“
button on the HSS TTL controller
to decrease energy level down to a minimum of -0,3; 30 steps.
•
Manual mode
o
Flash output is adjustable from 1/128 to 1/1 full power with an increment od 0.1 F-
Stops.
o
After exposure compensation in
„TTL“
mode, switch to the „M“ mo
de to keep
photographing under determined flash output.
o
After
setting up the „M“ mode by pressing the
„M“
button on the HSS TTL controller,
set the flash output by pressing the +/- buttons on the HSS TTL controller from 1/1 full
power to the lowest output of 1/128 with an increment of 0.1 F-Stops and a total of
70 steps.
