•
Calculating shutter speed
o
When utilizing multi-flash, camera shutter should be opened until flash stops.
o
Please refer to the table below to calculate shutter speed.
o
Number of flashes/ flash frequency
o
To prevent flash from overheating and
disorder, refrain from firing flash no
more than 10 times in multi-flash mode.
o
After firing in succession, flash should be
left unused for at least 5 minutes.
•
Reset settings
o
To reset the flash, press the
„MODE“
button on the flash for 2 seconds or longer. All
settings for group, channel, exposure compensation, sync and flash output are reset.
•
Battery (11,1V; 4,4A)
o
Press the button no. 13 (battery status indicator button) to determine battery charging
status on the LCD display.
o
To charge the battery, use only the adapter included in the package.
o
The LED light is red when charging. The LED light is green when battery is fully charged.
