21
Left/Right
exchange
joystick only
Not to select:
1.Left cross axis: Up/Down axis
2.Left cross axis: Left/Right axis
3.Right cross axis: Left/Right axis
4.Small single axis
To select:
Right cross axis: Up/Down axis
Joystick share
the same
accelerator relay
* Joystick/VR are
selectable
* The selected joystick or VR share the same relay.
* Either the selected joystick or VR is not in the center/
0° position (with output), the relay with joystick share the same
accelerator is ON.
* The selected joystick or VR is back to the center/0° position, the
relay with joystick share the same accelerator is OFF.
Opposite side
protection of
joystick spring
return
* For digital and
proportional
joysticks only.
* For cross type
joystick, not for
small single axis
joystick.
* When the joystick is back to neutral position, if the spring inertia
is too strong, then the joystick will spring back to the opposite
position. But the opposite relay output will be inhibited.
Assign the 8
th
axis as the output
that share the
same accelerator
* Digital joystick
without this
function
* All the activated
joysticks/VR
with the same
style
* Not to use the
8th joystick/VR
(reserved for
sharing the
same
accelerator
output)
* The 8th joystick/VR are reserved for sharing the same
accelerator output. Not to use for general joystick.
* Joystick/VR share the same accelerator output is the same as the
selected joystick or VR as highest output “absolute value”.
(output always with plus voltage).
* The selected joystick or VR is back to neutral /0° position,
joystick/VR share the same accelerator analog output back to
neutral/0° position output.
8 joysticks allow
only one function
at the same time
* Either cross type
joystick
restriction or this
function can be
selected
* When “joystick/VR share the same accelerator analog output” is
not considered, only 1 out of 8 with output.
* 1~8 joysticks/VR, detect from joystick/VR 1 to 2,3~8. At last,
the joystick function first with output (joystick or VR not on
neutral/0° position), the rest without output. When “all
joystick/VR (including the one without function)” back to
neutral/0° position, output back to neutral/0° position and start
again.
Cross type
joystick
restriction
* Joystick only
* Only 1 out of 8
single axis
joysticks is
allowed to
function
independently.
* Restriction for
each two
* Take 1-2 cross type joystick restriction as an example:
Joystick 1&2 without neutral but with output and another
joystick output is not allowed (1&2 joystick without neutral at
the same time, joystick 1 has the priority). When joystick 1&2
back to neutral, output back to neutral position and start again.
