23
When crane reaches the North SENSOR, the detecting point of
CN13 1S input will be 0V. The decoding firmware will be
restricted as South output. That is, when joystick is operated to
Down axis position, the output will be 0V. Then crane cannot go
to South anymore.
Selection of
linear output
curve: linear
* For proportional
joystick and VR
only
* The tilt percentage for input and output is fixed. Output from
neutral to maximum value is a straight line.
* Joystick/VR angle output corresponds to the tilt percentage of
this straight line.
Selection of
linear output
curve: curve
* For proportional
joystick and VR
only
* Forward/reverse parabola curves may be changed by dragging
mouse.
* Joystick/VR angle output corresponds to this curve.
Selection of
linear output
curve: logic
* For proportional
joystick and VR
only
* Output status is only available with neutral and highest level, no
in between one.
* Joystick moves/VR rotates to ”certain angle”, the output from
neutral immediately to highest point of the axis.
* Certain angle: changeable by dragging the mouse.
Non-symmetry
* For proportional
joystick and
neutral VR only
* Select “curve”
or “logic”
* Up/Down axis setting is independent.
