BASIC CONNECTIONS
Use the appropriate cable to connect the audio sources to the corresponding audio input. In the majority of
cases the cable must have codified red and white RCA connectors.
Example of a DVD connection:
1. Connect the DVD, OUT L and R audio output to the amplifier, DVD L and R audio input.
2. Connect the DVD video output to a TV monitor.
Example of a CD connection:
1. Connect the CD, OUT L and R audio output to the amplifier CD L and R audio input.
Take the following indications into account:
-
Connect all the components together before connecting them to the mains.
-
Before making any connection or disconnection, switch the amplifier off.
-
Make sure that the colour code on the amplifier terminals coincides with that of the connectors and
cables.
To avoid noise and interference follow the indications below:
- Insert the connectors firmly into the connector input.
- After connecting the audio system components lay the cables along the sides and the back panel of the
amplifier. Do not place them underneath the amplifier.
- The power supply and audio cables must be kept apart. Do not wind the power supply cables up.
- 9 -
EN
