EN
- 6 -
INSTRUCTIONS FOR USE
M-64 MICROPHONE CONNECTION
Connect the
M-64
microphone OUTPUT to the PRIORITY MIC
M-64
INPUT 1 of the
MPZ-6480RGU
amplifier
using the data cables provided. Activate the microphone capsule power supply by pressing the PHANTOM
+24 V button on INPUT 1, located on the rear panel of the
MPZ-6480RGU
amplifier.
It is possible to connect a maximum of 3
M-64
microphones to the system. These microphones are connected
in cascade between the LINK output of the first microphone and the OUTPUT of the next.
POWER REMOTE
EXTERNAL CONTROL
CONNECTION
MESSAGE BANK 1-6
GND
Z6
PAGING AMP
100 V INPUT
ZONES
100 V OUTPUTS
TEL
INPUT
MASTER
OUTPUT
Z5
Z4
Z3
Z2
Z1
4 Ω
USB
DATA
LINK
FM
+
-
PAGING MIC
MZ-648
INPUT 2
(3 MIC MAX.)
PRESS MIC 1 PHANTOM (3 MIC MAX.)
PRIORITY MIC M-64
INPUT 1
PRIORITY MIC
M-64 INPUT 1
OUTPUT
24 V DC
0.2 A MAX.
MSG
PROG
CHI
CAUTION: SHOCK HAZARD - DO NOT OPEN
RISK OF FIRE-REPLACE FUSE AS MARKED
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
POWER CONSUMPTION: 960 W
SINGLE ZONE: 120 W MAX.
TOTAL ZONE: 480 W MAX.
~110-120 V AC. 50/60 Hz FUSE: T12 AL 250 V
~220-240 V AC. 50/60 Hz FUSE: T6.3 AL 250 V
RINGER
PAGING
+
MZ-648 MSG
PRIORITY
AMP IN
REC
OUT
MIC/LINE INPUTS
GAIN
LINE
MIC
PHANTOM
+24 V
AUX 2
AUX 1
PAGING
OUTPUT
MPZ-6480RGU
ZONE AMPLIFIER
480 W RMS
+
COM
COM
GAIN
LINE
MIC
PHANTOM
+24 V
GAIN
LINE
MIC
PHANTOM
+24 V
GAIN
LINE
MIC
PHANTOM
+24 V
INPUT 1
INPUT 3
M-64 PRIORITY MIC
INPUT 2
INPUT 4
INPUT
MZ-648 PAGING MIC
LINK OUTPUT
AUX
INPUT
OFF: SLAVE
ON: MASTER
ON
OFF
MSG
MIC VOL.
MIX
MAX
USB
CHIME PROG
R
L
15 V DC, 0.8 A
LINK OUTPUT
AUX
INPUT
OFF: SLAVE
ON: MASTER
ON
OFF
MSG
MIC VOL.
MIX
MAX
USB
CHIME PROG
R
L
15 V DC, 0.8 A
LINK OUTPUT
AUX
INPUT
OFF: SLAVE
ON: MASTER
ON
OFF
MSG
MIC VOL.
MIX
MAX
USB
CHIME PROG
R
L
15 V DC, 0.8 A
PRIORITY
CHIME
OUTPUT
LINK
MASTER
OFF
ON
SLAVE
PRIORITY
CHIME
OUTPUT
LINK
MASTER
OFF
ON
SLAVE
PRIORITY
CHIME
OUTPUT
LINK
MASTER
OFF
ON
SLAVE
MPZ-6480RGU
MPZ-6480RGU
MZ-648 (3)
M-64 (1)
M-64 (2)
M-64 (3)
MZ-648 (2)
MZ-648 (1)
MZ-648
PAGING MICROPHONE
MZ-648
PAGING MICROPHONE
MZ-648
PAGING MICROPHONE
M-64
PRIORITY MICROPHONE
M-64
PRIORITY MICROPHONE
M-64
PRIORITY MICROPHONE
POWER REMOTE
EXTERNAL CONTROL
CONNECTION
MESSAGE BANK 1-6
GND
Z6
PAGING AMP
100 V INPUT
ZONES
100 V OUTPUTS
TEL
INPUT
MASTER
OUTPUT
Z5
Z4
Z3
Z2
Z1
4 Ω
USB
DATA
LINK
FM
+
-
PAGING MIC
MZ-648
INPUT 2
(3 MIC MAX.)
PRESS MIC 1 PHANTOM (3 MIC MAX.)
PRIORITY MIC M-64
INPUT 1
PRIORITY MIC
M-64 INPUT 1
OUTPUT
24 V DC
0.2 A MAX.
MSG
PROG
CHI
CAUTION: SHOCK HAZARD - DO NOT OPEN
RISK OF FIRE-REPLACE FUSE AS MARKED
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
POWER CONSUMPTION: 960 W
SINGLE ZONE: 120 W MAX.
TOTAL ZONE: 480 W MAX.
~110-120 V AC. 50/60 Hz FUSE: T12 AL 250 V
~220-240 V AC. 50/60 Hz FUSE: T6.3 AL 250 V
RINGER
PAGING
+
MZ-648 MSG
PRIORITY
AMP IN
REC
OUT
MIC/LINE INPUTS
GAIN
LINE
MIC
PHANTOM
+24 V
AUX 2
AUX 1
PAGING
OUTPUT
MPZ-6480RGU
ZONE AMPLIFIER
480 W RMS
+
COM
COM
GAIN
LINE
MIC
PHANTOM
+24 V
GAIN
LINE
MIC
PHANTOM
+24 V
GAIN
LINE
MIC
PHANTOM
+24 V
INPUT 1
INPUT 3
M-64 PRIORITY MIC
INPUT 2
INPUT 4
INPUT
MZ-648 PAGING MIC
PHANTOM
activated
OFF: SLAVE
ON: MASTER
ON
OFF
MSG
USB
CHIME PROG
PRIORITY
CHIME
MASTER
OFF
ON
SLAVE
USB
MSG CHI PROG
USB
MSG CHI PROG
The
M-64
microphone can be assigned maximum system priority (priority 1) located on
the PRIORITY selector on the rear panel of the
M-64
microphone in the ON position.
OFF: SLAVE
ON: MASTER
ON
OFF
MSG
USB
CHIME PROG
PRIORITY
CHIME
MASTER
OFF
ON
SLAVE
USB
MSG CHI PROG
USB
MSG CHI PROG
Likewise, the MASTER or SLAVE function of each of the microphones can be chosen.
In MASTER mode the
M-64
microphone has priority paging over the other
M-64
microphones even if the BUSY indicator is lit.
PAGING WITH THE M-64 MICROPHONE
To talk, press and hold the
M-64
microphone TALK button while delivering the message. If the BUSY
indicator is on you must wait until it turns off before you can speak, given that another
M-64
microphone is
in use at that moment.
In MASTER mode the
M-64
microphone has priority paging over the other
M-64
microphones even if the
BUSY indicator is on.
MZ-648 MICROPHONE CONNECTION
Connect the
MZ-648
microphone OUTPUT to the PAGING MIC MZ-648 INPUT 2 of the
MPZ-6480RGU
amplifier using the data cables provided.
The microphone requires 15 V DC power supply provided by the mains adapter supplied.
It is possible to connect a maximum of 3
MZ-648
microphones to the system.
These microphones are connected
in cascade between the LINK output of the first microphone and the OUTPUT of the next.
Summary of Contents for MPZ-6480RGU
