REAR PANEL
11.- Grounding screw.
12.- Turntable output, 2 x RCA connectors. The output level can be selected with the PHONO/LINE selector.
13.-
PHONO/LINE
: turntable output level selector: phono level or line level.
14.-
USB
: PC connection port, female USB B connector.
15.- Power supply input for mains adapter provided.
16.- Turntable on/off switch.
TONEARM WEIGHT ADJUSTMENT
1.- Remove the needle protector.
2.- Position the ANTI-SKATING control at 0.
3.- Place the cueing lever in the down position
/
.
4.- Release the tonearm and position it parallel to the platter, in the free space between the platter and the
tonearm rest, being careful not to damage the needle.
5.- Hold the tonearm gently by the headshell and level it by turning the counterweight to the left or to the
right. The adjustment is completed when the tonearm is parallel to the record above the platter and does
not lean towards the counterweight or towards the capsule when it is released.
6.- Place the tonearm on the tonearm rest and fasten it with the clip.
7.- Keep the counterweight in the set position and only turn the scale ring until the 0 mark is in line with
the mark printed on the axis of the tonearm.
8.- Then adjust the weight of the needle above the record: turn the scale ring along with the counterweight
to the grams required in accordance with the characteristics of the cartridge being used. If using the
cartridge provided, the counterweight must be adjusted to 1.5 to 2.5 grams.
- 5 -
EN
VINYL-12U_MANUAL_(EN)_20171009_Maquetación 1 10/10/17 8:11 Página 5
