Fonrich New Energy Technology Co., Ltd.
15
3) Insert the stripped conductor section into the corresponding connection port.
4) Press down the handle of the AC terminals.
4.3 AC Terminals(Three-phase four-wire connection)
When wiring three-phase four-wire, the silkscreen mark of the AC terminals is
not applicable, please follow the instructions for wiring.
Connect the product, inverter and grid through the AC terminals and N terminal
as shown in the figure below.
Procedure
1) Strip the insulation of the cables.
2) Pull up the handle of the AC terminals.
3) Insert the stripped conductor section of the cables into the corresponding
connection port.
4) Press down the handle of the AC terminals.
5) Insert the stripped conductor section of the cables into the OT terminal or
U-shaped terminal, and then connect it to the N terminal.
------THE END
Note: Cover the front panel of the product and fix it firmly with screws.
