Fonrich New Energy Technology Co., Ltd.
11
without difficulty.
Recommended installation clearances
If you maintain the recommended clearances,adequate heat dissipation will be
ensured. Thus,you will prevent power reduction due to excessive temperature.
Maintain the recommended clearances to walls as well as to other products or
objects.
(Dimensions in mm)
3.3 Drilling Diagram
Users can drill the bore holes according to their own needs.The size diagram of
the holes is as follows.
3.4 Procedure
1) Remove the four screws on the product cover using a flat-blade screwdriver,
and then remove the front panel.
2) Place the four fixtures under the four corners of the product bottom, put the
screws into the holes.And then screw the four fixtures to the product using the
screwdriver.
