1
2
7
4
6
3
9
5
8
Thank you for choosing a Fontastic
®
Product.
Please read this user manual carefully and comply with
the safety instructions.
Package contents
• 2 x Wireless headset Fontastic Dima
• Storage and charging power case
• Micro-USB cable
• User manual
If any of the above pieces is missing, please pack the product again and
return to dealer.
Overview:
1.
Microphone
2.
Multifunction button
3.
Status LED
4.
Battery case
5.
Headset slot
6.
Micro-USB socket
7.
Power LED
8.
Power button
9.
Charging contact
Getting started
Charging the battery
Place the headsets in the charging case. Make sure that the headsets are inserted
correctly and that the contacts of the headsets and the charging case touch each
other. Press the power button (8) and close the cover. The headset units are
charged via the internal battery charger. The red LED on the headsets will
fl
ash
during charging and goes o
ff
when they are fully charged. The current charge level
of the case is indicated by four LEDs on the front.
Charge the charging case
Connect the Micro USB charging cable to the socket (6) of the charging case and
the USB-A plug of the cable to a USB power source such as a computer or USB
charger.
The internal battery of the charging case will be charged. The charging status of the
box is indicated by 2 LEDs on the front side of the charging case. If both LEDs are
on, the box is fully charged.
Note:
The fully charged charging power case can o
ff
er 3 times charging of the
headsets.
Switching on/o
ff
Switch on:
as soon as you take o
ff
the headset from its charger, it will switch on.
Switch o
ff
:
Once the headsets are placed in the charging power case they will
switch o
ff
and disconnect with the Smartphone.
Note:
You can also switch o
ff
the headsets manually by pressing and holding the
multifunction button (2) for around 8 seconds.
Pairing
The Fontastic
Dima
Headset must be paired with a Bluetooth
®
device before use.
Remove the headsets from the charging power case. The two headsets will
automatically switch on and pair together. Activate Bluetooth
®
of your Smartphone
and search for “
Dima
” and connect your Smartphone with it. Pairing procedure is
completed and the headset is ready to use.
Note:
Di
ff
erent mobile phones may require di
ff
erent pairing methods.
Note:
If the connection is lost or the transmitter is temporarily disconnected,
Fontastic
®
Dima
automatically tries to restore the connection.
If the connection cannot be restored after 3 seconds, try again by pressing the
multifunction button (2) on one of the headsets or in using your Smartphones
Bluetooth
®
settings.
Note:
Once the pairing procedure is successfully done and the Dima is shown
in the Smartphones Bluetooth® list, the headset will automatically connected to the
Smartphone without the need to manually reconnect or pair it again.
Hands-free features
With its built-in microhone and intelligent noise reduction, the Fontastic
®
Dima
headset is perfectly suitable to make phone calls.
Music streaming
Start music streaming on the Smartphone which is paired with Fontastic
®
Dima.
The music is transferred to the Headsets.
Note:
The device must support the A2DP pro
fi
le for music streaming and AVRCP
pro
fi
le for music remote control.
Music control
To play or stop music playback
, brie
fl
y press the multifunction (2) button.
To skip to the next track,
press and hold the multifunction button (2) of
the left headset for around 4 seconds.
To return to the previous track
or the beginning of the track, press and
hold the multifunction button (2) of the right headset for around 4 seconds.
Answer/end/reject calls/Re-dial
To accept an incoming call
, brie
fl
y press the multifunction (2) button.
To end a call in progress
, brie
fl
y press the multifunction button (2).
To reject an incoming call,
press and hold the multifunction button (2) for
about 2 seconds.
Re-dial:
In standby mode or during music playback, press the multifunction
button (2) twice. The last dialled number will be dialled again.
Safety advice:
• This is not a toy for children. Keep the headset away from children under
3 years of age. There is danger of su
ff
ocation!
• Adjust the volume to a reasonably low level to use the headset for as long
as you like. Be sure to turn down the volume so that others do not have to scream
to be heard by you.
• Be careful not to use headset in potentially dangerous situations.
• Do not use the headset while operating a vehicle.
• Never open the device.
• Never immerse the unit in water, always protect it from moisture.
• Disconnect electronic devices from the power when not using them for longer time.
• Do not use headsets if they show any visible damage.
No liability is accepted for any damage caused by incorrect operation.
If you need technical support, please contact our support team by e-mail at
service@fontastic.eu.
Technical Speci
fi
cations:
• BT version: 5.0
• Pro
fi
le: Headset, hands-free, A2DP, AVRCP
• Range: up to 10 m
• Audio frequency range: 20Hz-20kHz
• Built-in high-performance microphone
• Status LED: blue/red
• Battery: Headset 40mAh, battery case 350mAh
• Operation time: at 70% Volume up to 3x 4.5 hrs.
• Weight: Headset 4.3g, battery case 28.4g
• Dimensions: Headset 22x11x46mm, battery case 26x48x57mm
Registration and Safety
We hereby declare that this device carries the CE mark in accordance with the
regulations and standards.
It complies with the fundamental requirements of the (RED) 2014/53/EU.
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the
national legal system, the following applies: Electrical and electronic devices
may not be disposed of with domestic waste. Consumers are obliged by
law to return electrical and electronic devices at the end of their service lives
to the public collecting points set up for this purpose or point of sale. Details of
this are de
fi
ned by the national law of the respective coun-try. This symbol on the
product, the instruction manual or the package indicates that a product is subject to
these regulations. By recycling, re-using the materials or other forms of utilising old
devices, you are making an important contribution to protecting our environment.
Wireless headset „Dima“
GB
Improvement and changes of the technical speci
fi
cations and other data’s could be made without prior notice. Fontastic, by D-Parts Mobilphon & Zubehör GmbH
●
Birkenweiher Str. 16
●
63505 Langenselbold, Germany 12_2019
