6
Low Battery
Fully Charged
Time/Date
Steps
Sleep
Pulse
Sport
Blood
pressure
Oxygen
Message
Music
Camera
More
Pause
training
Stop
training
Back to the trainig
Fig.1
Thank you for purchasing the FontaFit Tavi. Please read the
operating instruction carefully and follow the intstructions and
tips to get the most out of your Fintness Bracelet.
Package content
Smart Bracelet | Charging cradle | Manual
Overview
1.
Bracelet with quick release
2.
Housing
3.
1.22
″
TFT Display
4.
Touch sensitive button
5.
Sensors
6.
Charging connection
Getting started
Charging the battery
The FontaFit Tavi is equipped with a rechargeable
Lithium-Polymer battery. Fully charge the FontaFit Tavi
prior to putting the device into operation for the
fi
rst time.
For this purpose, please use attached charger.
Place the Tavi in the charger cradle where the pins
of the charger cradle and the Tavi are in contact (Fig.1).
Close the charger cradle. The charging cradle can
be charged with any USB-A power source or the
USB-A port of a Computer. Connect the USB cable
to a USB power source; the battery symbol will show
up and the battery will be charged. The usual charging
time is 1-2 hours. As soon as the battery is fully charged,
the icon will show a green Battery.
Note:
The bracelet can be exchanged with
common 20 mm bracelets with spring bar.
Switching the device on and off
To switch it on,
press and hold the button (4) for about 10 seconds. The FontaFit Tavi will switch on.
To power it off,
tap the button (4) until the time is displayed; then press and hold the button (4) twice for
about 3 seconds. The info menu appears followed by the power off/reset menu. Tap on the button (4) to
select the menu entry „Off“ and press and hold the button (4) again for about 3 seconds to con
fi
rm your
selection and power off the FontaFit Tavi.
Display
The FontaFit Tavi has a built-in LCD color display. The Date, Time, connection to the phone, walked
steps, sleep duration, heart rate, blood pressure, blood oxygen, weather, push messages are shown on
the display.
Attention:
Date and time will only be updated after connecting to the smartphone. Manual con
fi
guration
is not possible. Noti
fi
cation with emojis are not supported.
Watch face individualization
You can customize the watch face 1 with a photo of your choice.
1. Select the menu item „Watch faces“ in the app and go to „Edit“.
2. Go to „Select picture“, select your picture and de
fi
ne the section.
3. Adjust the colour, position and other settings as required.
4. Click on Save and wait until the image has been uploaded to the tavi.
This process takes about 90 seconds.
Three different watch faces are available. These can be selected via the app.
Enter submenu
Tap the button (4) to display the main menu items.
Press and hold the button (4) for approx. 3 seconds to activate the submenu (if available).
Press and hold the button (4) for approx. 3 seconds in the submenu to con
fi
rm a selection or return to
the main menu.
Step count
The step count burned calories and distance are displayed.
Sleep duration
The determined sleep duration is displayed here if you wear the FontaFit Tavi while sleeping. Further
data will be displayed in the app.
Pulse measurement
The pulse measurement is started here by press and holding the key (4).
Blood pressure measurement
The blood pressure measurement is started here by pressing and holding button (4).
Measurement of oxygen saturation
The measurement of oxygen saturation is started here by pressing and holding key (4).
Please note:
Wear the bracelet approx. 1cm above your wrist bone and make sure it is close to your
skin. Please note that other factors can lead to measurement inaccuracies:
Low blood circulation • Tattoos • Uneven or jerky movements • Sunscreen and other lotions • dirty
sensor.
Note:
By using optoelectronic pulse measurement (photoplethysmography), in which your blood
fl
ow is
detected by green LEDs and photo diodes, FontaFit also displays values when the bracelet is worn too
loosely or not worn at all. For this reason, make sure that the wristband
fi
ts correctly when measuring
your heart rate.
This is not a medical device: Data from the Step, pulse, blood pressure and oxygen saturation
functions are not intended to be used for medical purposes.
Sport
Some activities are pre-programmed in the Sports menu. To enter the submenu, press and the hold
button (4). Here you can choose between Walking, Running, Cycling,
Skipping, Badminton, Basketball, Soccer, Swimming.
Activate them by pressing and holding the button (4).
Dynamic heart rate measurement is activated in sport mode.
You can end current activities by pressing and holding the button (4).
Con
fi
rm your selection.
Notifi cations and incoming phone calls
The FontaFit Tavi displays noti
fi
cations or incoming calls directly.
In the menu, you can display the last 3 noti
fi
cations by pressing and holding the button (4).
Other menu items
If your Fonta
fi
t Tavi is connected to your smartphone and within range, the following menu items are
available:
• Current weather and 1-day weather forecast
• camera remote control
• control music.
This can be activated in the main menu by pressing and holding the button (4).
Installing the app
Download and install the “FontaFit Pro” app by scanning the QR code
or follow the link:(URL: www.d-parts.de/app/fonta
fi
t_pro)
Note:
The Android app requires Android 4.4 or later.
The iOS app requires iOS 9 or later.
Establishing a Bluetooth
®
connection and using the app
Switch on Fonta
fi
t Tavi, enable Bluetooth
®
on your smartphone and start the app. First enter your data in
the app, such as your gender, height, weight and year of birth.
Note:
This data is used to correctly calculate calorie consumption and distance.
Go to „ADD DEVICE“ to connect the FontaFit Tavi to your smartphone.
After successful connection, date, time and weather data are transferred from the smartphone to the
FontaFit Tavi.
The following functions can be activated by the app:
• Watch face: Here you can choose between three watch faces which are displayed on the FontaFit Tavi.
• Noti
fi
cations: Here you set which noti
fi
cations are displayed on the FontaFit Tavi.
• Alarm clock: Here you can set up to 3 alarm clocks. The FontaFit Tavi will vibrate when the alarm clock
rings.
• Photo Shutter: Here you can use the FontaFit Tavi as a photo shutter for the camera of your
smartphone.
• Reminder: If you activate this function, the FontaFit Tavi will remind you every hour by vibrating. You
can use the reminder function to get up, walk, drink, etc.
• Do not disturb: here you can set the time at which no noti
fi
cations are sent to the FontaFit Tavi.
• Full-time Heart Rate: When enabled, Tavi automatically measures your heart rate every 30 minutes.“
For more information on steps, sleep, pulse, blood pressure, oxygen, sport activities and route recording,
tap the appropriate menu in the app.
Note:
The route recording requires activation of the GPS function of the smartphone.
If you need technical support, please contact our support team by our website under
support.fontastic.eu.
Safety advice:
• Do not open the device
• The device is water-resistant, not waterproof. Further information on water resistance can be found on
our website www.d-parts.de.
• Do not use the device when it has visible defects.
Technical Data
• Connection: Bluetooth
®
4.0
• Battery type: Lithium polymer
• Display: 1.22
″
TFT color Display
• Working temperature: -10°- +40° C
• Material Bracelet: Silicone
• IP68 protection for continuous immersion up to 30 minutes in 1.5 meter depth
Registration and Safety
Certi
fi
cation/General Information
We hereby declare, that this device carries the CE mark in accordance with the
regulations and standards. It conforms with the fundamental requirements of the
(RED) 2014/53/EC.
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the national legal
system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end of
their service lives to the public collecting points set up for this purpose or point of sale. Details
of this are de
fi
ned by the national law of the respective coun-try. This symbol on the product,
the instruction manual or the package indicates that a product is subject to these regulations.
By recycling, re-using the materials or other forms of utilising old devices, you are making an
important contribution to protecting our environment.
Subject to technical changes / Fontastic, by D-Parts Mobilphon & Zubehör GmbH
●
Birkenweiherstr, 16
●
63505 Langenselbold, Germany / V1_10_18
Smart Bracelet „Tavi“
GB
