background image

MAKE A FOODSAVER

®

 BAG:

1.  Open Appliance Lid 

and place roll into Roll 

Storage. 

2.  Lift up Roll Cutter Bar 

and place bag material 

beneath the cutter bar. 

Pull out enough bag 

material to hold item 

being vacuum sealed, plus 

3 inches (7.62 cm). Lower 

the Roll Cutter Bar and 

slide Bag Cutter across 

Cutter Bar.

3.  Move Easy Lock Latch to 

the Open position. Open 

Appliance Lid. Insert 

one end of bag material 

across Sealing Strip.

4.  Close lid and turn Easy 

Lock Latch to Operate 

position.

5.  Press Seal Button.

6.  When Seal Indicator 

Light turns off, sealing is 

complete. Turn Latch to 

Open position, lift lid and remove bag.

HOW TO: 

FM2100 SERIES QUICK START GUIDE

FoodSaver

®

 Select Vacuum Sealer

Español

p. 3

Français

p. 2

VACUUM SEAL FOODSAVER

®

 

ZIPPER BAGS: 

(sold separately) 

1.  Prepare zipper bags 

according to FoodSaver

®

 

Accessory Guidelines, 

which are included with 

accessory purchases. For 

zipper bags, make sure 

not to put any food under 

the valve and press zipper 

closed with finger while bag is lying down on a flat 

surface. 

2.  Turn Latch to Operate position. 

3.  Insert one end of Accessory Hose into Accessory Port 

on Appliance. Place Handheld Sealer on zipper bag 

valve.  

4.  Press Vacuum & Seal Button.  

Zipper bags are safe for pantry and fridge use only.

VACUUM SEAL A FOODSAVER

®

 BAG:

1.  Place item(s) in bag, 

allowing at least 3 inches 

(7.62 cm) of space between 

bag contents and top of 

bag.

2.  Open Appliance Lid and 

place open end of bag into 

Vacuum Channel (Drip Tray).

3.  Close lid and turn Easy Lock 

Latch to Operate position. 

4.  Press Vacuum & Seal Button 

to begin vacuum and 

sealing process. Motor will 

continue to run until bag 

is fully vacuumed, then will 

automatically seal. 

5.  When Seal Indicator Light 

turns off, turn Latch to Open 

position, lift lid and remove 

bag.  

Refrigerate, freeze or store 

as needed.

VACUUM SEAL FOODSAVER

®

 

CONTAINERS: 

(sold separately) 

1.  Prepare FoodSaver

®

 Preserve 

& Marinate Container 

according to Guidelines, 

which are included with 

container purchase. 

2.  Turn Latch to Operate 

position. 

3.  Insert one end of Accessory 

Hose into Accessory Port on 

Appliance. Place Handheld Sealer on container valve.

4.  Press Vacuum & Seal Button. 

To release vacuum and open, turn knob on lid to Open. 

See Owner's Manual for full instructions and safeguards.

Place Bag in Vacuum Channel

Close and Latch Lid

Operate

Store

Open

Press Vacuum & Seal Button

p. 1

Place Bag on Sealing Strip

OPE

N EN

D

SEA

LED

 END

SEA

LED

 END

   OP

EN 

END

SEA

LED

 EN

D

C

lose and turn Easy Lock Latch to 

Operate position

Press Seal Button

Operate

Store

Open

FM2100_22EFSQSG1 (digital).indd   1

FM2100_22EFSQSG1 (digital).indd   1

2022/3/16   上午10:14

2022/3/16   上午10:14

Reviews: