Container Adapter Storage
1. Conveniently store Container Adapter
on the bottom of the Charging Base as
shown.
**ONLY AVAILABLE IN SELECT MODELS
Care & Cleaning
1. Always unplug appliance before
cleaning.
2. Do not immerse appliance in water.
3. Avoid using abrasive products or materials
to clean any appliance components. These
cleaners can scratch the surface and
damage the black foam rubber pads.
4. Use mild dish washing soap and a warm,
damp cloth to wipe away food residue
inside or around components.
5. Empty Reservoir after each use. Wash
in warm soapy water. Air dry before
replacing.
IMPORTANT:
To remove Reservoir from Vacuum Nozzle:
while holding the Vacuum Nozzle with one
hand pull the Reservoir cleanly away from
Nozzle.
FoodSaver
TM
Containers
1. The Container Base can be safely washed
in the top rack of the dishwasher. You can
also wash both pieces in warm, soapy
water; rinse well and dry thoroughly.
2. Do Not attempt to remove grey rubber
sucker.
3. FoodSaver™ Container bases are top
rack dishwasher safe.
4. FoodSaver™ Containers are microwave
safe.
Troubleshooting
Vacuum sealer does not start when ON
Button is pressed:
1. Ensure vacuum sealer is charged.
Vacuum Sealer starts but bag does not
tighten around food:
1. Ensure zipper is firmly closed. Slide
fingers across entire zipper.
2. Air valve is not on flat surface. Reposition
bag so the Air Valve lies flat on counter
with no food under Air Valve.
3. Do not overfill bag.
4. Do not use excessive force when opening
the bag. This could damage the zipper.
Vacuum Nozzle and Air Valve are not
making secure contact:
1. Ensure Vacuum Nozzle is centered over
the green circle and placed flat on Air
Valve. PRESS GENTLY – pressing too
hard will result in a failure to remove air
from the bag.
Air was removed from the bag, but now
air has re-entered:
1. Examine zipper and valve of bag. Food
debris in zipper or valve may cause
leakage and allow air to enter.
2. Sometimes moisture or food material
along seal edges of the zipper or beneath
the valve prevents bag from sealing
properly. Wipe the inside of bag around
zipper and beneath value and attempt to
reseal.
3. If you are vacuum packaging sharp food
items, bag may have been punctured. Use
a new bag if there is a hole. Cover sharp
food items with a soft cushioning material,
such as a paper towel, and reseal.
The FoodSaver
TM
Container will not
vacuum:
1. Make sure the rubber gasket on inside
of lid is free from food materials.
2. Examine rim of container for cracks
or scratches. Any gaps can prevent
containers from vacuuming properly.
Care, Cleaning & Troubleshooting
