background image

g

Accessories

FoodSaver Accessory  Guidelines

FoodSaver Accessories

Accessories include FoodSaver Vacuum Packaging Canisters, Universal Lids, Jar Sealers and Bottle Stoppers.

1.

Always leave at least one inch of space between
contents and rim.  

2.

Wipe rim of canister, container or bottle to ensure
it is clean and dry.  

3.

Place lid on canister or container, or place stopper
in bottle. 

4.

For accessories with a large knob on lid, turn knob
to

Vacuum

. Vacuum package using instructions

below. When vacuum process is complete, turn
knob to 

Closed

before removing Accessory Hose. 

5.

For accessories without a large knob on lid, 
vacuum package using instructions below.

How to Open FoodSaver Accessories after Vacuum Packaging

FoodSaver Vacuum Packaging Canisters 

(without large knob on lid)

To release vacuum and open, push gray rubber 
button on lid.

FoodSaver Bulk Canisters and Quick Marinators 

(with large knob on lid) and Universal Lids

To release vacuum and open, turn knob on lid 
to 

Open

.

FoodSaver Jar Sealer with Mason Jars

For use with Ball

®

and Kerr

® 

brand Mason jars.

IMPORTANT:

Do NOT use screw bands when 

vacuum packaging jars. To open, wedge spoon
between Mason jar lid and highest part of threaded
rim. Twist spoon gently to release vacuum.

FoodSaver Bottle Stoppers

To release vacuum and open, twist and pull up on
Bottle Stopper.

How to Vacuum Package with FoodSaver Accessories

1.

Prepare container according to FoodSaver
Accessory Guidelines above.

2.

Insert one end of Accessory Hose 

(B)

into

Accessory Port 

(H)

on appliance. Insert other

end into port on accessory. Twist gray tab while
inserting to ensure a tight fit.

3.

Turn Seal Control Switch 

(E)

to .

4.

To begin vacuum process, press down firmly on
lid until motor starts, then release. Motor will
continue to run.

5.

When motor and Indicator Light 

(F)

turn off,

vacuum process is complete.

6.

Gently twist and remove Accessory Hose from
accessory and appliance.

7.

To test vacuum, simply tug on accessory lid. It
should not move.

Note:

For important tips on using accessories 

with different foods, please refer to the 

FoodSaver

Reference Guide

.

1

Insert Accessory Hose

Set Seal Control Switch

Press and Release Lid

QS.1505_GSpro_v3  6/29/04  11:13 AM  Page 3

Reviews: