-7-
HOW TO VACUUM SEAL WITH FOODSAVER
TM
BAGS (CONT.)
-6-
HOW TO MAKE CUSTOM SIZED BAGS WITH THE
INTEGRATED BAG ROLL (CONT.)
8. When the motor stops and the Progress Indicator Lights shut off, sealing is complete.
9. Press the Open/Cancel button.
10. The custom sized bag is ready for vacuum sealing.
NOTE:
The Open/Cancel button can be used to cancel the process mid-cycle and open the Lid. The
bag will not be sealed when doing this.
CAUTION:
This sealer is not for commercial use. If sealing more than 30 bags in a row wait at least
25 minutes before continuing to use your vacuum food sealer.
CAUTION:
The unit has a cool down period between cycles. Wait 20 seconds before using again.
1. Place the items to be sealed into a pre-cut or custom sized bag. Leave at least 7.5 cm between
the contents and the top of the bag to allow for bag contraction.
2. Open the Lid and place the open end of the bag into the Drip Tray.
3. Close
Lid.
4. Change Press to Select the appropriate Seal Level – Choose Moist for foods with high liquid
content or Regular for dry foods.
5. To begin the vacuum process, press down firmly on Lid with both hands and hold until the motor
starts. Continue to hold the Lid. When the Hands-free Indicator Light illuminates, it is safe to
remove hands from the Lid. The unit continues to vacuum and seal the bag.
HOW TO VACUUM SEAL WITH FOODSAVER
TM
BAGS
6. When the motor stops and the Progress Indicator Lights shut off, sealing is complete.
7. Press the Open/Cancel button.
8. Lift the Lid and remove the bag.
NOTE:
The Open/Cancel button can be used to cancel the process mid-cycle and open the lid. The
bag will not be sealed when doing this.
CAUTION:
This sealer is not for commercial use. If sealing more than 30 bags in a row wait at least
25 minutes before continuing to use your vacuum food sealer.
CAUTION:
The unit has a cool down period between cycles. Wait 20 seconds before using again.
HOW TO VACUUM SEAL WITH OTHER BRAND ACCESSORIES
1. Firmly insert one end of the Accessory Hose that came with your machine into the Accessory
Port.
2. Attach the other end of the Accessory Hose to the accessory.
3. To begin the vacuum process, press down firmly on Lid with both hands and hold until the motor
starts. Continue to hold the Lid. When the Hands-free Indicator Light illuminates, it is safe to
remove hands from the Lid. The unit continues to vacuum. Once all of the air is removed, the
motor and indicator lights will automatically turn off.
NOTE:
Sealer will not operate if Lid is not properly closed.
NOTE:
The Open/Cancel button can also be used to cancel the process mid-cycle and open the Lid.
V1040-I_10MLM1.indd 7-8
V1040-I_10MLM1.indd 7-8
3/8/10 2:07:38 PM
3/8/10 2:07:38 PM
