Tidondolo - 10
PARTS CHECKING LIST
1
a
b
2. Make sure the end points of the front bars are correctly
inserted in the slots 1 on both sides. Turn the chair
over, rotate the safety lever 2 and press at the same
time the two hook buttons towards the centre in direction
3 , contemporaneously rotate the rear frame in direction
indicated by arrow 4 , until it clicks into place. Release
the hook buttons 3 .
3. Turn over the chair , open the
safety lock.
1. Take out the chair, raise the rear bar and make the angle from the bar to the floor to be
90 degree,and then move the two front bars to both sides “a” e “b”.
1
4
1
sx
dx
2
3
The iconograph is to better illustrate
the operation means and structure
of the product. When there are some
differences between the practical and
the inset, the practical is confirmed. In
order to better improving the quality,
we may make some change on some
parts of the structure and appearance
without informing, please understand.
PREPARATION FOR USE
music device
rear bar
feet
seat
toy bar
harness
velcro for fixing
handles
handles
