39
Split mode display
OFF:
Displays the image after correction.
MODE1: Splits the screen vertically and displays images before and after correction.
MODE2: Splits the screen horizontally and displays images before and after correction.
MODE3: Displays the image before correction.
Color-corrected images are processed through VIDEO PROCESS AMPLIFIER (see section 6-1), COLOR
CORRECTION (see section 6-7) and VIDEO CLIP (see section 6-7).
* If the selected FS bypasses the Color Correction process, this menu is disabled. Change
COLOR
CORRECTION BY-PASS
to
Operate
, then reset the parameter. (See section 6-16.)
6-8. COLOR CORRECTION WHITE LEVEL
F S 1 N a m e : F S 1
- - - C O L O R C O R R E C T I O N W H I T E L E V E L - - -
P 5 0 8
F S 1 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 2 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 3 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 4 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
F S 5 R : 1 0 0 . 0 % G : 1 0 0 . 0 % B : 1 0 0 . 0 %
Parameter
Default
Setting range
(Steps)
Description
White Level(RGB)
100.0%
0.0 - 200.0%
(0.5%)
Allows you to adjust R, G, and B
components of the white level separately
for the selected FS.
F4 allows you to adjust R, G, and B
components simultaneously.
The FS number of the selected FS blinks. FS numbers of linked FSs also blink.
Displays
“---“ if the parameter setting cannot be changed due to the Correction Mode setting.
To change the FS selection to set settings, refer to section 5-3-7.
To simultaneously change settings of multiple FSs, refer to section 5-3-8.
* If the selected FS bypasses the Color Correction process, this menu is disabled. Change
COLOR CORRECTION BY-PASS
to
Operate
, then reset the parameter. (See section
CC
SETUP
2
Mode: 1
Mode: OFF
Mode: 2
Mode: 3
Image before
correction
Image after
correction
