79
7-4. EMBEDDED AUDIO MULTIPLEX
F S 1 N a m e : F S 1
- - - E M B E D D E D A U D I O M U L T I P L E X - - -
P 6 1 4
F 1 A u d i o G r o u p 1 : A u t o
F 2 A u d i o G r o u p 2 : A u t o
F 3 A u d i o G r o u p 3 : A u t o
F 4 A u d i o G r o u p 4 : A u t o
Parameter
Default
Setting range
Description
Audio
Group 1
Auto
Auto
Reference
Input CH 1/2
Input CH 3/4
Allows you to select an audio clock per group for
SDI embedded audio output for each FS.
Auto:
Automatically selects audio clock input in
the NON-PCM signal channel, if an input
NON-PCM signal is in the selected SDI
embedded audio group. Automatically selects
audio clock signal in the smallest numbered
channel, if all signals in the audio group are
NON-PCM. Automatically selects audio clock
signal synchronized to the output video signal, if
all signals in the audio group are PCM.
Reference
: Uses an audio clock synchronized
with the output video signal. (Used to
synchronize audio with the video signals
processed in the SRC.)
C
H 1/2 - 15/16:
An input audio clock in channels
1/2 to 15/16. An input audio clock in channels
1/2 to 15/16.
To output asynchronous audio signals, select
one input channel pair for each group.
For SD-SDI outputs,
Reference clock
is
automatically selected regardless of the setting.
Audio
Group 2
Auto
Auto
Reference
Input CH 5/6
Input CH 7/8
Audio
Group 3
Auto
Auto
Reference
Input CH 9/10
Input CH 11/12
Audio
Group 4
Auto
Auto
Reference
Input CH 13/14
Input CH 15/16
To change the FS selection to set settings, refer to section 5-3-7.
”
7-5. EMBEDDED AUDIO SRC MODE
F S 1 N a m e : F S 1
- - - E M B E D D E D A U D I O S R C M O D E - - -
P 6 1 6
F 1 C H 1 / 2 : A u t o F 2 C H 3 / 4 : A u t o
C H 5 / 6 : A u t o C H 7 / 8 : A u t o
C H 9 / 1 0 : A u t o C H 1 1 / 1 2 : A u t o
C H 1 3 / 1 4 : A u t o C H 1 5 / 1 6 : A u t o
Parameter
Default
Setting range
Description
CH1/2 -
CH15/16
Auto
Auto
SRC In
By-pass
Allows you to the SRC circuit to pass or by-pass
audio signals per channel pair for each FS.
Auto:
Sets the SRC circuit to pass signals. However,
NON-PCM audio signals will be by-passed.
By-pass:
Sets the SRC circuit to by-pass signals.
Set to
By-pass
to output asynchronous audio
signals. To embed the asynchronous audio signals to
SDI video signals, an audio clock must be selected
under SDI Output Clock Select in the SDI Audio
Output Setting menu (sec. 9-3-10) for the respective
audio groups.
SRC In:
Sets the SRC circuit to pass both PCM or
NON-PCM signals. Useful for the irregular PCM
signal with the NON-PCM audio channel status
indication. However, real NON-PCM signals cannot
be output properly.
Move the F1/F2 indication to the item to be changed using the single-arrow buttons.
To change the FS selection to set settings, refer to section 5-3-7.
CC
SETUP
2
PROC
EMB
1
