44
6-13. Copying Video Process / Color Corrector Settings
The following two submenu settings can be copied between FSs using an extra menu page, FS
DATA COPY.
FS DATA COPY menu
To open the FS DATA COPY menu, press and hold the PROC EMB button (with lit green) or the
CC SETUP button (with lit green). The menu button flashes green while this menu is displayed.
- - - F S D A T A C O P Y - - - C O P Y
F 1 M o d e : C o l o r C o r r e c t o r + V i d e o P r o c e s s
F 2 S o u r c e : F S 1
F 3 D e s t i n a t i o n : F S 2
F 4 U n i t y C o p y S t a r t
Parameter
Default
Setting range
Description
MODE
Color
Corrector
Color Corrector
Video Process
Color CoVideo Process
Selects a submenu to be
copied.
Source
FS1
FS1 - FS10
Selects an FS for copy source.
Destination
FS2
FS1 - FS10
Selects an FS for copy
destination.
Press
F4 Unity
to execute data copy.
Parameters to be copied
FA-1010/9500/9520
FA-505 (V1.21 or less)
FA-505 (V2.03)
FA-505 (V2.10-)
MODE
setting
Parameters
Parameters
Parameters
Video
Process
Video Level
Y Level
Chroma Level
Setup/Black Level
Hue
(Same as at left)
(Same as at left)
Color
Corrector
White (RGB)
Black (RGB)
Gamma (RGB)
Gamma Range
Gamma Curve
Correction Mode
Sepia Level
Sepia Color
(Same as at left)
(Same as at left)
-
Input Color Space
In Gamma Curve (EOTF)
Output Color Space
Out Gamma Curve (OETF)
(Same as at left)
-
ST2084 (PQ) Range
Dynamic Range
-
Dynamic Range
In Peak Luminance
In Peak Luminance(Variable)
Out Peak Luminance
Out Peak Luminance(Variable)
PROC
EMB
1
CC
SETUP
2
