93
7-29. MICROPHONE SETTINGS
- - - M I C R O P H O N E S E T T I N G S - - -
P 6 8 2
F 1 C H 1 / 2 I n p u t M o d e : L i n e L e v e l
F 2 M i c r o p h o n e P o w e r : O f f
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| C a u t i o n ! ! |
| V e r i f y a n a l o g a u d i o i n p u t s i g n a l ( C H 1 / 2 ) |
| b e f o r e c h a n g i n g s e t t i n g s |
| _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
Analog audio CH1 and CH2 can be used for microphone audio inputs.
They can also be used for power outputs to microphones.
Item
Default
Setting range
(Steps)
Description
CH1/2 Input Mode * Line Level
Line Level
Microphone Level
Allows you to set the input signal level
for analog audio input CH1, and CH2.
Microphone Power
*
Off
Off
On(+48V)
On(+48V): Outputs power for
microphones.
Selectable if Ch1/2 Input Mode is set
to Microphone Level.
If Ch1/2 Input Mode is set to Line
while On(+48V) is selected, the
Microphone Power setting
automatically turns Off.
Displayed if an FA-10ANA-AUD is installed.
* This setting requires you to confirm the setting change as the setting change confirmation
regardless of the setting under the OPERATION SETTINGS menu (see sec. 6-22).
Caution
Ensure proper audio signal level input to analog audio input Ch1 and
Ch2, before changing the CH1/2 Input Mode or Microphone Power
setting. Incorrect level audio signal input levels may impair or damage
connected devices.
ANC
ANALOG
9
